ASTM E2141-12
ASTM E2189-10e1
ASTM E2190-10
ASTM E2353-14
ASTM E2358-04(2010)..
ASTM E2431-12
Cookies
We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
ASTM F1233-08(2013)
Standard Test Method for Security Glazing Materials And Systems
STANDARD published on 1.5.2013
The information about the standard:
Designation standards: ASTM F1233-08(2013)
Note: WITHDRAWN
Publication date standards: 1.5.2013
SKU: NS-49581
The number of pages: 13
Approximate weight : 39 g (0.09 lbs)
Country: American technical standard
Category: Technical standards ASTM
The category - similar standards:
Annotation of standard text ASTM F1233-08(2013) :
Keywords:
asset level, ballistic attack, ballistic impacts, ballistic penetration, blunt tool impacts, body passage, chemical deterioration, forced entry, glazing classification, glazing system tests, passage of contraband, physical attack, relation ballistic threats, security glazing, security glazing materials, security glazing systems, spall, thermal stress, threat level, witness plate, ICS Number Code 81.040.20 (Glass in building)
Additional information
| Significance and Use | ||||||||
|
6.1 This test method is based on field experience rather than laboratory analysis. It provides a basis for the comparative evaluation of ballistic/forced entry/containment resistance of security glazings and systems and should not be used to establish or confirm the absolute prevention of forcible entries or forced exits. This test method defines three factors which determine the success or failure of any attempt to forcefully enter (or exit) the glazing or system. They are: (1.1 This test method sets forth procedures whose purpose is limited to the evaluation of the resistance of security glazing materials and systems against the following threats: 1.1.1 Ballistic Impact, 1.1.2 Blunt Tool Impacts, 1.1.3 Sharp Tool Impacts, 1.1.4 Thermal Stress, and 1.1.5 Chemical Deterioration. 1.2 The values stated in inch-pounds
are to be regarded as the standard. The values given in parentheses
are for information only.
1.3 This standard does not
purport to address all of the safety concerns, if any, associated
with its use. It is the responsibility of the user of this standard
to establish appropriate safety and health practices and determine
the applicability of regulatory limitations prior to use.
Standard Guide for Selection of Physical
Security Measures for a Facility (Withdrawn 2004) Standard Specification for Alloy Steel
Socket-Head Cap Screws Standard Specification for Pipe, Steel,
Black and Hot-Dipped, Zinc-Coated, Welded and Seamless Standard Specification for Carbon
Structural Steel |
Similar standards:
Historical
15.11.2012
Historical
1.11.2010
Historical
1.11.2010
Historical
15.5.2014
Historical
1.10.2010
Historical
1.4.2012
We recommend:
Technical standards updating
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
