Cookies
We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
UOP 212-05
Hydrogen Sulfide, Mercaptan Sulfur, and Carbonyl Sulfide in Hydrocarbon Gases by Potentiometric Titration
STANDARD published on 1.2.2005
The information about the standard:
Designation standards: UOP 212-05
Publication date standards: 1.2.2005
SKU: NS-574700
The number of pages: 25
Approximate weight : 75 g (0.17 lbs)
Country: American technical standard
Category: Technical standards UOP
Preview of the standard UOP 212-05
| 1. Scope |
|
This method is for determining hydrogen sulfide (H2S), mercaptan sulfur (RSH) and carbonyl sulfide (COS) in gaseous hydrocarbons and in typical liquefied petroleum gas (LPG) consisting of C3 and/or C4 hydrocarbons. Also covered is the determination of mercaptan sulfur in LPG which may contain a wide range of hydrocarbon types ranging from ethane to such gasoline boiling range hydrocarbons as pentane and hexane. Each sulfur type can be determined from less than 1 to several thousand mass-ppm sulfur (less than 0.1 to several thousand grains per 100 cu ft). |
We recommend:
Updating of laws
Do you want to be sure about the validity of used regulations?
We offer you a solution so that you could use valid and updated legislative regulations.
Would you like to get more information? Look at this page.
