ASTM C1482-12

Standard Specification for Polyimide Flexible Cellular Thermal and Sound Absorbing Insulation

STANDARD published on 1.9.2012

Language
Format	PDF - Immediate download - 83.00 USD Print design - 83.00 USD
Availability	IN STOCK
Price	83.00 USD excl. VAT
83.00 USD

The information about the standard:

Designation standards: ASTM C1482-12
Note: WITHDRAWN
Publication date standards: 1.9.2012
SKU: NS-11487
The number of pages: 11
Approximate weight : 33 g (0.07 lbs)
Country: American technical standard
Category: Technical standards ASTM

Send to a colleague

Query

The category - similar standards:

Thermal and sound insulating materials

Annotation of standard text ASTM C1482-12 :

Keywords:
flexible cellular insulation, pipe insulation, polyimide, ship insulation, sound absorbing, thermal insulation, ICS Number Code 91.100.60 (Thermal and sound insulating materials)

Additional information


1. Scope
1.1 This specification covers the composition and physical properties of lightweight, flexible open-cell polyimide foam insulation intended for use as thermal and sound-absorbing insulation for temperatures from -328°F up to +572°F (-200°C and +300°C) in commercial and industrial environments. 1.1.1 Annex A1 includes faced polyimide foam as specified by the U.S. Navy for marine applications. 1.1.2 This standard is designed as a material specification and not a design document. Physical property requirements vary by application and temperature. No single test is adequate for estimating either the minimum or maximum use temperature of polyimide foam under all possible conditions. Consult the manufacturer for specific recommendations and physical properties for specific applications. 1.1.3 The use of an appropriate vapor retarder is required in all applications where condensation could occur and cause a decrease in thermal performance or affect other system properties. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard is used to measure and describe the response of materials, products, or assemblies to heat and flame under controlled conditions, but does not by itself incorporate all factors required for fire-hazard or fire-risk assessment of the materials, products, or assemblies under actual fire conditions. 1.4 This standard does not purport to address all of the safety concerns associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.
C1045-19	Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions
C165-23	Standard Test Method for Measuring Compressive Properties of Thermal Insulations
C168-22	Standard Terminology Relating to Thermal Insulation
C177-19e1	Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus (Includes all amendments and changes 2/23/2023).
C302-13(2022)	Standard Test Method for Density and Dimensions of Preformed Pipe-Covering-Type Thermal Insulation
C335-05a	Standard Test Method for Steady-State Heat Transfer Properties of Pipe Insulation
C390-08(2019)	Standard Practice for Sampling and Acceptance of Thermal Insulation Lots
C411-19	Standard Test Method for Hot-Surface Performance of High-Temperature Thermal Insulation
C421-08(2020)	Standard Test Method for Tumbling Friability of Preformed Block-Type and Preformed Pipe-Covering-Type Thermal Insulation
C1114-06(2019)	Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus
C1338-19(2022)	Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings
D543-21	Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents
C634-22	Standard Terminology Relating to Building and Environmental Acoustics
C665-23	Standard Specification for Mineral-Fiber Blanket Thermal Insulation for Light Frame Construction and Manufactured Housing
D638-22	Standard Test Method for Tensile Properties of Plastics
E662-21ae1	Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials (Includes all amendments and changes 9/16/2021).
DOD-E-24607	Enamel, Interior, Nonflaming (Dry), Chlorinated Alkyd Resin, Semigloss (Metric)
E800-20	Standard Guide for Measurement of Gases Present or Generated During Fires
E1354-23	Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
E84-23d	Standard Test Method for Surface Burning Characteristics of Building Materials (Includes all amendments and changes 1/29/2024).
E96/E96M-23	Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials
E176-24	Standard Terminology of Fire Standards
E795-23	Standard Practices for Mounting Test Specimens During Sound Absorption Tests
E2231-21	Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics
C1058-03	Standard Practice for Selecting Temperatures for Evaluating and Reporting Thermal Properties of Thermal Insulation
C1304-23	Standard Test Method for Assessing the Odor Emission of Thermal Insulation Materials
C1559-15(2021)	Standard Test Method for Determining Wicking of Fibrous Glass Blanket Insulation (Aircraft Type)
D395-18	Standard Test Methods for Rubber Property´Compression Set
D2126-20	Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging
D3574-17	Standard Test Methods for Flexible Cellular Materials´Slab, Bonded, and Molded Urethane Foams
D3675-22	Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source
C585-22	Standard Practice for Inner and Outer Diameters of Thermal Insulation for Nominal Sizes of Pipe and Tubing
C423-23	Standard Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method
C447-15(2022)	Standard Practice for Estimating the Maximum Use Temperature of Thermal Insulations
C518-21	Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus

Similar standards:

ASTM C1224-11

Historical
15.5.2011

ASTM C1320-10

Historical
1.11.2010

ASTM C1335-12

Historical
1.5.2012

ASTM C1338-14

Historical
1.1.2014

ASTM C1374-14

Historical
15.4.2014

ASTM C1410-13

Historical
15.5.2013

We recommend:

Updating of laws

Do you want to be sure about the validity of used regulations?
We offer you a solution so that you could use valid and updated legislative regulations.
Would you like to get more information? Look at this page.