We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
Standard Test Method for Determination of Uranium, Oxygen to Uranium (O/U), and Oxygen to Metal (O/M) in Sintered Uranium Dioxide and Gadolinia-Uranium Dioxide Pellets by Atmospheric Equilibration (Includes all amendments And changes 2/8/2018).
Automatically translated name:
Standard Test Method for Determination of Uranium, Oxygen to Uranium (O/U), and Oxygen to Metal (O/M) in Sintered Uranium Dioxide and Gadolinia-Uranium Dioxide Pellets by Atmospheric Equilibration
STANDARD published on 1.6.2011
Designation standards: ASTM C1430-07(2011)e1
Note: WITHDRAWN
Publication date standards: 1.6.2011
SKU: NS-11228
The number of pages: 6
Approximate weight : 18 g (0.04 lbs)
Country: American technical standard
Category: Technical standards ASTM
Keywords:
atmospheric equilibration, equilibration, oxygen to metal, oxygen to uranium,Atmospheric equilibration, Equilibration, Gadolinium oxide-uranium dioxide powder/pellets, Oxygen-to-metal (O/M) ratio, Oxygen-to-uranium (O/U) atomic ratio, Sintered uranium dioxide, Uranium, ICS Number Code 27.120.30 (Fissile materials and nuclear fuel technology)
Significance and Use | ||||||||||
Uranium dioxide is used as a nuclear-reactor fuel. This test method is designed to determine whether the percent uranium and O/U or O/M content meet Specifications C776 and C922. |
||||||||||
1. Scope | ||||||||||
1.1 This test method applies to the determination of uranium, the oxygen to uranium (O/U) ratio in sintered uranium dioxide pellets, and the oxygen to metal (O/M) ratio in sintered gadolinium oxide-uranium dioxide pellets with a Gd2O3 concentration of up to 12 weight %. The O/M calculations assume that the gadolinium and uranium oxides are present in a metal dioxide solid solution. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific hazards statements, see Section 8. |
||||||||||
2. Referenced Documents | ||||||||||
|
Historical
1.1.2013
Historical
1.6.2011
Historical
1.6.2011
Historical
1.1.2008
Historical
1.6.2010
Historical
1.6.2010
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
Latest update: 2024-04-25 (Number of items: 2 896 007)
© Copyright 2024 NORMSERVIS s.r.o.