Cookies
We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
IEC 60811-508-ed.1.0
Electric and optical fibre cables - Test methods for non-metallic materials - Part 508: Mechanical tests - Pressure test at high temperature for insulation and sheaths
STANDARD published on 13.3.2012
The information about the standard:
Designation standards: IEC 60811-508-ed.1.0
Publication date standards: 13.3.2012
SKU: NS-411576
The number of pages: 36
Approximate weight : 108 g (0.24 lbs)
Country: International technical standard
Category: Technical standards IEC
The category - similar standards:
Annotation of standard text IEC 60811-508-ed.1.0 :
IEC 60811-508:2012 gives the procedure for a pressure test at high temperature, which typically applies to thermoplastic compounds used for insulating and sheathing materials. IEC 60811-508:2012 cancels and replaces Clause 8 of IEC 60811-3-1:1985, which is withdrawn. Full details of the replacements are shown in Annex A of IEC 60811-100:2012. Significant technical changes with respect to the previous edition are as follows: - re-statement of oven characteristics, especially relating to anti-vibration and to temperature control; - enhanced detail as to the preparations and testing of flat cables; - enhanced detail as to thickness and dimensional measurements. See also the Foreword to IEC 60811-100:2012. This publication is to be read in conjunction with IEC 60811-100:2012. La CEI 60811-508:2012 decrit la procedure a suivre pour realiser lessai de pression a temperature elevee, generalement applicable aux melanges thermoplastiques utilises pour les materiaux disolation et de gainage. La CEI 60811-508:2012 annule et remplace lArticle 8 de la CEI 60811-3-1:1985, qui est supprimee. Lensemble des details relatifs aux remplacements figure dans lAnnexe A de la CEI 60811-100:2012. Des modifications techniques importantes ont ete effectuees par rapport a ledition precedente, comme suit: - redefinition des caracteristiques relatives a letuve, en particulier les caracteristiques antivibratoires et le controle de la temperature; - des details supplementaires relatifs aux preparations et aux essais de cables meplats; - des details supplementaires relatifs aux mesures depaisseur et de dimensions. Voir egalement lavant-propos de la CEI 60811-100:2012. Cette publication doit etre lue conjointement avec la CEI 60811-100:2012.
These changes apply to this standard:
IEC 60811-508-ed.1.0/Amd.1
Change
Show all technical information.
Amendment 1 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 508: Mechanical tests - Pressure test at high temperature for insulation and sheaths
(Amendement 1 - Cables electriques et a fibres optiques - Methodes d´essai pour les materiaux non metalliques - Partie 508: Essais mecaniques - Essai de pression a temperature elevee pour les enveloppes isolantes et les gaines)
Change published on 21.7.2017
Selected format:Show all technical information.
IEC 60811-508-ed.1.0/Amd.2
Change
Show all technical information.
Amendment 2 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 508: Mechanical tests - Pressure test at high temperature for insulation and sheaths
(Amendement 2 - Cables electriques et a fibres optiques - Methodes d´essai pour les materiaux non-metalliques - Partie 508: Essais mecaniques - Essai de pression a temperature elevee pour les enveloppes isolantes et les gaines)
Change published on 2.11.2023
Selected format:Show all technical information.
We recommend:
Updating of laws
Do you want to be sure about the validity of used regulations?
We offer you a solution so that you could use valid and updated legislative regulations.
Would you like to get more information? Look at this page.
