IEC 60811-513-ed.1.0

Annotation of standard text IEC 60811-513-ed.1.0 :

IEC 60811-513:2012 gives procedures for a wrapping test after conditioning at elevated temperature. This test method applies specifically to polyethylene and polypropylene insulation. This test is intended for samples from filled cables of polyolefin insulation having a wall thickness of less than or equal to 0,8 mm. IEC 60811-513:2012 cancels and replaces Clause 9 of IEC 60811-4-2:2004, which is withdrawn. Full details of the replacements are shown in Annex A of IEC 60811-100:2012. There are no specific technical changes with respect to the previous edition, but see the Foreword to IEC 60811-100:2012. This publication is to be read in conjunction with IEC 60811-100:2012. La CEI 60811-513:2012 decrit la procedure a suivre pour realiser un essai denroulement apres conditionnement a temperature elevee. Cette methode dessai sapplique specifiquement aux enveloppes isolantes en polyethylene et polypropylene. Cet essai sapplique aux enveloppes isolantes a base de polyolefines des cables remplis ayant une epaisseur de paroi inferieure ou egale a 0,8 mm. La CEI 60811-513:2012 annule et remplace lArticle 9 de la CEI 60811-4-2:2004, qui est supprimee. Lensemble des informations relatives aux remplacements figure dans lAnnexe A de la CEI 60811-100:2012. Aucune modification technique na ete effectuee par rapport a ledition precedente; voir cependant lavant-propos de la CEI 60811-100:2012. Cette publication doit etre lue conjointement avec la CEI 60811-100:2012.